Mark DeBlasio

As a captain with Canyon Runner Sport Fishing out of Point Pleasant, NJ, Capt. Mark has more than 700 canyon trips under his belt. He joined the Canyon Runner Team in 2004 after years of working 9-5 in the "real world."

Search This Blog

January 26, 2012

Florida Swordfishing ... the next chapter

by Canyon Runner

Its been a crazy month...spur of the moment trips, epic battles, victories, losses, long sleep deprived stretches, old friends, new friends...but bottom line is that its been a blast. It all came together Tuesday in a big way as I was preparing to head home for our seminar. We had some of Joe's friends in for a long weekend and had caught swords, wahoo, mahi and bottom fish during that time. By Monday afternoon , everyone was headed home and Joe and I got caught up with cleaning the boat, going over tackle and figuring out what we were going to do with the last few days available in January. Looking at the weather forecast, Tuesday into Wednesday looked good so we set a tentative plan to get out and give the swords another try Tueday evening. We made a few calls to see if anyone was available to join us , but being midweek, most everyone local had work commitments. By Tueday morning the weather forecast had increased from 5-10 knots to 10-15 knots. It was still fishable, but with just the two of us and having fished hard the previous few weeks , we decided to pass and not get beat up. We broke down all the offshore equipment , cleaned it up and stowed it away. By early afternoon, the sun was out and it was a beautiful day, so we opted to go out for a few hours and catch some bait, then go try and bend the rods with some AJ's or Kings. Bait was a little difficult to catch, but we managed a few pieces and headed off to 180 feet of water to a reef. Joe jigged a nice AJ and we both commented on how nice it was offshore. Its was 3:30 by now and we knew the 4 pm forecast would be coming out shortly. We were chomping at the bit to continue perfecting our sword techniques and rebound from the loss of a huge sword after a 7 hour battle just two weeks prior. The updated forecast came out and had improved to 10 knots throughout the night. As we read it , we both smiled and decided to go for it...our last shot before heading home. I ran the boat and Joe defrosted baits and put rods back together. We arrived at the spot and I put her on the drift to see our exact track and go to work prepping leaders, flossing sinker loops and rigging baits. By the time we got everything prepped, it was 5:45 and the sun was very low in the sky. I checked our drift and was pleasantly surprised to see it was exactly what I had hoped for and we were in a great position to start fishing. We set out three rods, two LP1200 electrics to cover the deep lines and one Penn 50W to cover the upper part of the water. We dont normally fish two electrics with a full crew, but with just the two of us, it made clearing lines and checking baits much easier. We also knew at some points during the night, it would just be one of us in the pit while the other caught a nap. Fishing deep lines in the gulfstream requires up to 8 lbs of weight to keep the baits in the zone. Reeling in that kind of weight from 150-400 feet down all night becomes a chore. So this night , we decided on fishing two LP's. Just after getting dark, the deep rod did the classic swordfish bounce, then slack and we were tight. The fish came up in about 15 minutes and we lifted it over the side and measured it @ 50". We have been getting so many requests for fish from Joes extended family and friends in the Stuart area, that we decided to keep it as "a bird in hand is better then two in the bush". We got reset and drifted for a while with no more action. Watching the cockpit sounder , we were still marking bait but our depth was getting a little deep so we decided to run back south and restart the drift. I started reeling in the first line and it gets whacked as its coming up. The line counter reads 265, so Joe quickly moves the other LP to 265 and he gets bit and tight. We get the fish to the boat and its around the same size as the first , so we decided to release it. We pull it aboard to unhook and see its bleeding badly, so we decide not to waste it and put the fish on ice. We move back down the line and get ready to start a new drift. I have noticed that our bigger fish have come from a certain area , so I line up the drift to take us over that area. By now its past dinner time , so Joe starts whipping up an awesome salad with some grilled mahi in a ginger sauce. After dinner , he decides to start the rotation of napping that we know we will have to do to get through the night. He lays down and I am sitting on the mezzanine watching rod tips. Five minutes goes by and the deep rod gets hit hard. I wait for the line to either come tight or go slack but it doesn't , so I move the bait up quickly in hopes the sword will get aggressive and eat it. After reeling 30 or so feet , I stop and after a few seconds she piles on and we are tight. I look at the line counter and its at 380 or so. At this point I am alone in the cockpit with a fish on and two other rods to clear. I yell for Joe, but he is out cold. The LP reels have a nice auto retreive feature , allowing me to hit the button and walk away, stopping at a preset depth which we have set just a few feet from the boat. I go inside and wake Joe and rush back to the cockpit. Joe goes to work reeling in the 50W as I remove the weight and stow the LP that doesn't have a fish on it.. By the time we get cleared, the line counter is at 1100 and the fish is screaming towards the surface and towards the bow. We get the boat started and spin it so the fish is off the port corner and go to work. The fish must have realized something was wrong as she made a series of runs , then charges at the boat. The line would go slack for extended periods of time as she outpaced the reel. On more then one occasion I thought we had pulled the hook, but each time she would turn and the rod would resume its bend. Although fishing heavy weights can be a royal pain, my feeling is they keep enough tension on the line to keep a fish hooked when they charge the boat like this fish did. After one of these violent runs, she settled in near the surface. I eased the boat back a little and to my surprise, we closed the gap. We watched as the line counter steadily decreased until she was within 130 feet. We had already decided I would work the rod, remove the weight and harpoon, while Joe ran the boat to make sure the fish stayed where we wanted it. Soon, she popped to the surface on the edge of the lights and slashed her sword. We knew she was big and by know I could see she had gotten tailwrapped on her last charge at the boat. Everything went according to plan and we got a clean harpoon shot. Joe followed with a gaff and we had her secure. I was worried she would light up and create havoc, so I got a tailrope on the fish to give us a minute to regroup. At this point everything was good and we went about opening the transom door and getting prepared to pull her in the boat. We were drifting side to the wind with the swords head pointed to the starboard side of the boat and her tail to port. We attempted to pull her in for a good while and just could not manage to get her in. The fish carried a lot of weight in the mid section and was laying at an angle and with the tail down in the water. The two of us could not get her angled correctly to slide in. I tied a poly ball to her tail to give us a better angle and got the same result. We tried turning the boat down sea with the troll valves moving us ahead very slowly and still could not get her in. By now we were spent and had to look for other alternatives. I started thinking about the potential of sharks getting the fish so we had to come up with a plan. I had run across this issue a few years ago when fishing in Chatham for Giant Bluefin and ended up using the anchor windlass to get a large bluefin in the boat. Fortunately for us, Joe has a windlass on the Blue Runner so we got it rigged up. We put a flying gaff in the most solid part of the fish near the base of the bill. We ran the anchor rope down the starboard side of the boat, outside the cleats, from the windlass to the flying gaff head. The windlass was the capstan type, where you take three or four wraps around the windlass and have to keep tension on it for it to pull the anchor. The controls for it are on the bridge, which meant on of us would have to be on the bow, while the other was on the bridge. This also meant the cockpit would be empty so we couldn't guide the fish or watch to be sure the gaff wasn't ripping out or damaging the boat. We didn't like those options , so Joe came up with the idea to run the other end of the rope down the port side so we could keep tension on the rope from the cockpit. I was in the cockpit and Joe on the bridge controlling the capstan. I added pressure and the rope came tight and started pulling but the dorsal fin and pec fins were hanging up and she still would not come in. We needed to guide the fish towards the port with a gaff so the dorsal had a chance to clear, but that meant both of us would have to be in the cockpit , one guiding the fish and one tensioning the rope.This also meant no one could operate the windlass and we worried that once she came in we would not be able to stop the windlass and the fish would be pulled into the mezzanine and the gaff would damage the boat. We tried unsuccessfully for a bit then gave in a decided to let the windlass run. Joe would tension the rope as needed and I would pull and guide with the gaff. We started pulling and she started coming in, then hung up and the gaff starting tearing through and straightening the hook. At that point,she suddenly popped through the door. I'm not sure why, but I really didn't care .. she was on deck and huge.



We looked at each other and said at the same time "we are not putting lines back in the water". We pointed her towards the inlet and brought her up to 8 knots while we got cleaned up. As tired as we were at this point, neither one of us could sleep so we just chugged in at 8 knots the entire way and enjoyed the ride. I go back in Febuary, not sure what to do for an encore ....



Comments (0)

Post a Comment




You must login to post a comment.
Username:
Password:
remember my password at this computer

Don't have an account? Register Here
You are not logged in: Log inRegister
Affiliated Sites:   noreast.com   2coolfishing.com   Stripers247.com

© 2007 Noreast Media, LLC.
Terms under which this service is provided to you.
Print this page
Contact us
Get help using Allcoast.com

All Coast Media Network 2 Cool Fishing Noreast.com Stripers247.com All Coast Ifish.net JRun Servlet Error

500

ROOT CAUSE: 
coldfusion.runtime.ClientScopeDBException: Operation failed on the noreastclientvariables data source.
	at coldfusion.runtime.JDBCHelper.Store(JDBCHelper.java:256)
	at coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariables(ClientScopeServiceImpl.java:358)
	at coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariablesForRequest(ClientScopeServiceImpl.java:324)
	at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:33)
	at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
	at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
	at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
	at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
	at coldfusion.CfmServlet.service(CfmServlet.java:198)
	at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
	at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
	at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
	at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
	at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
	at jrun.servlet.FilterChain.service(FilterChain.java:101)
	at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
	at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
	at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
	at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
	at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
	at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
	at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
	at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
	at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

javax.servlet.ServletException: ROOT CAUSE: 
coldfusion.runtime.ClientScopeDBException: Operation failed on the noreastclientvariables data source.
	at coldfusion.runtime.JDBCHelper.Store(JDBCHelper.java:256)
	at coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariables(ClientScopeServiceImpl.java:358)
	at coldfusion.runtime.ClientScopeServiceImpl.PersistClientVariablesForRequest(ClientScopeServiceImpl.java:324)
	at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:33)
	at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
	at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
	at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
	at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
	at coldfusion.CfmServlet.service(CfmServlet.java:198)
	at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
	at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
	at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
	at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
	at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
	at jrun.servlet.FilterChain.service(FilterChain.java:101)
	at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
	at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
	at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
	at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
	at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
	at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
	at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
	at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
	at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

	at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:70)
	at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
	at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
	at jrun.servlet.FilterChain.service(FilterChain.java:101)
	at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
	at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
	at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
	at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
	at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
	at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
	at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
	at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
	at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)