Discussion Board

BHP Tackle - 201-767-9028
Wind-On Leaders - Topshots
Hollow Spectra Linewinding
www.bhptackle.com

Bud N Mary's Marina
World Famous Islamorada, FL Keys!
Private Charters, Party Boat, Hotel
www.budnmarys.com

Buy your Allcoast Text Ad Now!

Home • Search • Top Posters • Today's Active Topics

View mode:

trini 20a on seeker ulua rod

Discussion Boards > Shimano, Power Pro and GLoomis Product Support

06/29/2012 08:55 AM

Reply with Quote

doradochaser

Joined: 02/12/2009
Posts: 14

trini 20a on seeker ulua rod

any suggestions i cant make the reel fit with the stock hardware any help would be appreciated. standard ulua corktape is thick to fit trinidad reel seat. thanks in advance jeff

07/02/2012 08:22 AM

Reply with Quote

Bantam1

Joined: 02/22/2007
Posts: 809

re: trini 20a on seeker ulua rod

To be honest I'm not sure. You may have to shave the cork a little on that rod. We do not offer any longer hardware for the A model clamps. They use a special T-bolt that is not something you will find at a hardware store. I know there are some aftermarket clamps sold at Fishermans Landing in San Diego. That may be your only option.

07/09/2012 08:48 AM

Reply with Quote

doradochaser

Joined: 02/12/2009
Posts: 14

re: trini 20a on seeker ulua rod

Thanks to the guys down at charkbait, who took their time to set me up with an tiburon clamp that works perfectly with this combo.

07/09/2012 08:42 PM

Reply with Quote

dhancali

Joined: 03/21/2007
Posts: 570

re: trini 20a on seeker ulua rod

Can you post which Tiburon Clamp (model #) please?
Just curious, why does Shimano not offer longer screws for an almost $500 reel? (your stock/only screws for these reel are pretty dam short!!!!)

07/09/2012 09:02 PM

Reply with Quote

REK

Joined: 06/05/2007
Posts: 932

re: trini 20a on seeker ulua rod

dhancali wrote:
Can you post which Tiburon Clamp (model #) please?
Just curious, why does Shimano not offer longer screws for an almost $500 reel? (your stock/only screws for these reel are pretty dam short!!!!)

Don't have an Ulua but you got me thinking. Pulled a Trini 20 and it easily fit a fat 3M Aftco reelseat. Spectra, tiny reels, on an Ulua. Thanks doradochaser, good to know if I ever go that route.

This post edited by REK 07/10/2012

07/10/2012 07:03 AM

Reply with Quote

Bantam1

Joined: 02/22/2007
Posts: 809

re: trini 20a on seeker ulua rod

dhancali wrote:
Can you post which Tiburon Clamp (model #) please?
Just curious, why does Shimano not offer longer screws for an almost $500 reel? (your stock/only screws for these reel are pretty dam short!!!!)

We have actually made them longer than they used to be. The clamps work on all of our rods and most of the rods out there that you will use the reel on. There are some exceptions as you are aware.

	Discussion Boards > Shimano, Power Pro and GLoomis Product Support

Jump to:

Discussion Board Terms of Service

You are not logged in: Log in

Affiliated Sites: noreast.com 2coolfishing.com Stripers247.com

Print this page