Stan Fagerstrom is a member of both the National Freshwater Fishing Hall of Fame as well as the Bass Fishing Hall of Fame. Stan is also known internationally for his casting skills. Stan welcomes your e-mail comments at [email protected]
Search This Blog
October 31, 2013
The Stan's Spin Spinnerbait - Part 1
by Stan FagerstromPart 1
I never expected it to happen. And not very darn many of us who are into fishing up to our necks have had a similar experience.
So what am I talking about? It's having a lure maker who has just produced a new model of a popular bass fishing lure call and ask if they can use your name on it.
One of the reasons this happened, of course, is because I've been writing about bass fishing since shortly after the fall of the Roman Empire. Well, I guess it hasn't been quite that long but my first writing on the subject did see daylight way back in 1946.
It was still a pleasant surprise when the good folks at Mack's Lure, a growing Pacific Northwest tackle company, came up with a brand new style spinnerbait some years back. The company was headquartered at that time in Leavenworth, Washington and today Mack's is located in Wenatchee, Washington.
You may not be familiar with Mack's Lure but if you're a guy who likes to troll for trout you've undoubtedly heard about their Wedding Ring spinners. If you haven't heard about the Wedding Rings you should remedy that immediately. Those things have probably put more trout in the boat than darn near anything you can find.
Ray McPherson, at that time the president of Mack's Lure, knew that I had helped pioneer the sport of bass fishing in the Pacific Northwest. He asked if I'd help in the testing of his company's new spinnerbait and if it was all right with me if they called it the 'Stan's Spin.'
It's a special kick to catch fish using a lure that has your name on it. The Mack's Lure Stan's Spin spinnerbait has done lots of that for me.
Ray, one of the finest men I've had opportunity to meet, will verify my response. He'll tell you I told him I'd be pleased and proud to have my name associated with a Mack's Lure product, but with one stipulation. That stipulation was that the lure would catch fish. He immediately gave me prototypes of these new lures in an assortment of colors for testing purposes.
I was familiar Ray McPherson and his company. As I've indicated, I had the highest regard for both. Ray and I share a number of beliefs that aren't restricted to just the selling of fishing tackle.
As soon as I got the samples I immediately set about testing them. My first experience with them was at Siltcoos Lake on the Central Oregon Coast. The very first time I tried them there I wound up having one of the better days I'd ever had on that particular lake. I continued to have sufficient success with the new lure elsewhere. They didn't get fish every time out. Neither did the unending assortment of other baits I'd tried. Properly fished they got their share and then some. I called my friend Ray and gave him an enthusiastic "Let's do it."
The original Stan's Spin was marketed with only the plastic spinner blade you see here.
I had a hand in the design of this pro model of the Stan's Spin spinnerbait. As you can see, this one has a metal blade to go along with its Mylar plastic blade. The added metal blade gives the lure more vibration and sound on the retrieve.
While I was proud to see my name on the new spinnerbait once it hit the market, I found I had another reaction. I very much wanted other bass anglers to have the same success with it as I'd had.
One of the first questions I had from anglers who purchased the lure was "What's the best way to fish it?" It's a question I continue to get. I wish there was one easy answer to that question, but there isn't. Bass, you see, don't always react the same way. That's one of the things that make the sport so darn interesting and challenging. What those fickle boogers do today they might not do tomorrow.
Most newcomers to fishing a spinnerbait do the same thing whether it's the Stan Spin or some other model they're throwing. They simply cast it out and reel it back. Rarely do they vary the speed of their retrieve or try a variety of other procedures that sometimes pay off big time.
Have you, for example, ever tried fishing a spinnerbait so slowly that it was bumping the bottom all the way back to the boat? Now and then you're going to be surprised if you can simply manage to slow down enough to try it.
Bass fishing isn't one of my wife's favorite things, but every once in awhile I can talk her into going along. On those relatively rare occasions she does accompany me I know in advance the lure she'll invariably want me to tie on for her. It will be a spinnerbait. That was true before there was a Stan's Spin and it's even truer now.
Like most other bass fishermen I'm inclined to fish too fast. My wife doesn't have that problem. Time after time she'll sit back there in the stern seat of my bass boat and throw her Stan's Spin into water I've already covered. The difference is she retrieves so slowly the lure gets down where mine didn't. Now and then, for that matter more often than I care to admit, she catches fish when all I get is casting practice.
There's more than one reason why that slow retrieve with the Stan's Spin often pays off. If there's a good bit of cover where the bass are holding, a slow retrieve is a cinch to cause the lure to bump off underwater obstructions. For some reason bass can't stand to see a lure bump and run without doing something about it. It's a super way to trigger strikes when the fishing is slow.
I've found smallmouth bass often grab a Stan's Spin spinnerbait as readily as do largemouth. This one did that on Oregon's beautiful Umpqua River.
The Stan's Spin had something else going for it where spinnerbaits are concerned. Its appearance in the water is different. There's nothing else out there quite like it. If you've seen some of the same research on bass fishing I have you know this can be of great significance.
Bass have been proven to stay away from things they've had trouble with before. Show 'em something new, something they aren't aware is going to spell trouble if they grab it, and up go your odds of catching fish.
They put my name on the original Stan's Spin but I didn't design it. I have had a hand in certain parts of the changes made to the lure since it first came to market. The original model had just a single Mylar plastic blade.
The Pro Model Stan's Spin now available also has a metal blade to go along with its Mylar blade You still have the easy-turning Mylar blade at the back but now you also have the whump and thump vibration of the Colorado style metal blade up ahead of it.
There are a number of ways to fish these dandy spinnerbaits. In my next column I'll get into some procedures I've used with it, those techniques have accounted for lots of fish, including the second biggest largemouth I've ever boated.
You'll find my next column right here beginning Dec. 1.
-To Be Continued-