Coastal Fishing Forums: AllCoast banner
1 - 4 of 4 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter · #1 ·
Anybody have any advice for troubleshooting why my radar is reading targets off my 180 degrees. It was working perfect but had a friend playing with it, then to find out this problem. It could be a coincidence with him fooling around with it and that it is a more serious problem. I have read the manual and still have not figured it out. Any advise would be greatly appreciated including if I need to call somebody to come out
 

·
Registered
Joined
·
3,678 Posts
It is in the manual!

1. Set ship?s heading toward a suitable target (for example, ship or buoy) at a range
between 0.125 and 0.25 nautical mile.
2. Open the RADAR SETUP menu, and press the NEXT PAGE soft key.
3. Select HEADING ADJUST and press the EDIT soft key or [ENTER] knob to show the HEADING ADJUST window.
4. Select ON followed by [ENTER] key or ENTER soft key to show the radar display.
5. Rotate the [ENTER] knob to bisect the target with the EBL.
6. Press the SET soft key.
7. As a final test, move the boat towards a small buoy and confirm that the buoy shows up dead ahead on the radar when it is visually dead ahead.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top