Coastal Fishing Forums: AllCoast banner
1 - 7 of 7 Posts

·
Registered
Joined
·
68 Posts
im going to assume that you dont have a rod wrapping machine so its going to be hard to do. i would take it to a tackle shop and ask them to turn it down on their machine. any shop should be able to do. all there going to do is put it on the machine and spin it while putting a piece of sand paper to it till it gets to the right diameter.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top